HYDRAULIC PUMPS

MTE gear pumps are made in three series of models with displacements ranging from 0.5 GPM to 35 GPM. MTE pumps are designed to provide greater torque efficiencies – especially at high speeds and elevated pressures. Numerous shaft, bearing, mounting and seal options are available. Each model is designed to operate as either a single rotation or bi-rotational pump, depending on the application.

---

TYPICAL APPLICATIONS:

• Material handling

• Agricultural
equipment

• Construction &
mobile equipment

• Fluid transfer
systems

---

MTE HYDRAULIC PUMP SPECIFICATIONS

MODEL NUMBER	DISPLACEMENT GALLONS/REV	DISPLACEMENT CU.IN./REV	AVG. SLIP GPM/100 PSI	PRESSURE MAX. PSI	SPEED MAX. RPM
.
100	0.000052	0.012	0.004	3000	5000
101	0.000081	0.0186	0.004	3000	5000
102	0.000109	0.0252	0.005	3000	5000
103	0.000184	0.0425	0.005	3000	4500
105	0.000287	0.0664	0.007	2500	4000
.
C201	0.00029	0.0671	0.015	3500	5000
C202	0.000477	0.1102	0.017	3000	5000
C203	0.000652	0.1506	0.019	3000	5000
C204	0.000829	0.1916	0.02	2500	4000
C205	0.001089	0.2515	0.022	2200	4000
C207	0.0014	0.3234	0.025	1850	3600
C210	0.002074	0.4791	0.03	1250	2500
.
B304	0.001764	0.4075	0.04	2500	5000
B307	0.003019	0.6973	0.045	2350	4000
B310	0.004225	0.976	0.055	1650	3500
B312	0.005281	1.2199	0.065	1400	2800
B315	0.006295	1.4541	0.075	1100	2400
.
A407	0.006748	1.5587	0.07	2500	4000
A409	0.008435	1.9484	0.08	2500	3500
A411	0.010121	2.338	0.09	2450	3000
A415	0.013135	3.0341	0.11	1850	2300
A418	0.016868	3.8965	0.14	1450	1800
A421	0.019117	4.416	0.18	1300	1750
.
All numbers given are nominal values and should be used for reference only. All product specifications are subject to change without prior notice.

ADDITIONAL MTE HYDRAULICS OEM PRODUCTS:
• Two-Stage Pumps
• Hydraulic Motors
• Pump / Motor Units
• Lift / Check / Dump AC Power Units
• Lift / Check / Dump DC Power Units
• Bi-Rotational Power Units
• Pressure & Return Units
• Proportionators
• OEM Specific Units
• Custom Solutions